Cutting conditions saved to memory can be loaded.
You can select the memory from USER 1 to USER 8. Note that loading cutting conditions from memory erases any cutting conditions that have not been saved.

Procedure

Make sure the material is loaded in the machine.
  1. Press [MENU] several times to display the screen shown in the figure.

     

  2. Press [Up].

     

  3. Press the [Right ] key, and then press the [Right] key.

     

  4. Use [Up ] and [Down] to select the memory number you wish to load.

  5. Press [ENTER] to execute the operation.

    Use [MENU] to return to the screen in the figure.

Other Things That You Can Do