This setting lets you set the speed for moving the blade to the next cutting position with the blade lifted off the material during cutting operation.
When this is set to [AUTO], the blade moves at the speed specified by [SPEED]. Increasing [UPSPEED] shortens the cutting time. When cutting material that is thinner or thicker than the standard material, it may be better to decrease the speed to prevent problems such as the material being lifted up.

 Factory default setting   AUTO
 Setting range   10 to 50 cm/s (in 10 cm/s steps), AUTO 

Procedure

Make sure the material is loaded in the machine.
  1. Press [MENU] several times to display the screen shown in the figure.

     

  2. Press [Down] to display the screen shown in the figure.

  3. Press [Right].

     

  4. Press [Up ] or [Down] several times to display the screen shown in the figure.

  5. Press [Right].

  6. Use [Up ] and [Down] to set the value.

  7. Press [ENTER].

    Press [MENU] to return to the top screen.

Other Things That You Can Do