Setting the Displayed Unit

The unit used in messages on the display can be selected.

Procedure

Make sure the material is loaded in the machine.

1. Press [MENU] several times to display the screen shown in the figure.

   

2. Press [] several times to display the screen shown in the figure.

   

3. Press the [] key, the [] key, and then press the [] key.

   The screen shown in the figure below is displayed.

   

4. Use [] and [] to select the unit.

   It is possible to select millimeters or inches.

    

5. Press [ENTER] to select the setting.

   Use [MENU] to return to the screen in the figure.

   

    

Other Things That You Can Do