Procedure

  1. From the File menu, click Cutting Setup.

  2. Clear the Use perforated cutting conditions of machine check box.

    You can now enter the values.

  3. Enter the Perforated Cutting Conditions.

    Set the length of each perforation to make in the material (the perforation length) and the length of the part that is not perforated because the blade force is reduced (the half-cut length).
    Adjust the half-cut force to suit the type of material or paper used.

    About the Perforation length/Half-cut length


       *1: Perforation length
       *2: Half-cut length

    Perforation length > Half-cut length

    Perforation length = Half-cut length

    Perforation length < Half-cut length

  4. Click OK.